|
Underwriters Laboratory UL 752 Ballistic Standards
The data shown below for UL752 test standards does not contain all the information required for each test level. Data was intentionally left out to provide the basic information about the standard. Contact us for the full standard details.
Note: If a manufacturer wants to place the "UL logo" or utilize the Underwriters Laboratory name or trademark on their products such as on an imprinted decal, then the UL has to be involved. The manufacturer needs to get permission from Underwriters Laboratory in order to do so.
| |
|
| | Standard - Rating: | UL - Level 1 9 mm Parabellum ( Part 1 ) | Projectile Caliber : | 9 mm Parabellum | Cartridge Type: | 124 grain FMJ | Velocity Range: | 1175 to 1292.5 ft/sec. | Number of Shots: | 3 shots | Shot Spacing: | 4.0 inch triangle | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | (-26/72), 55, 72, 95, 120 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Indoor rating test: #1 at 55 F, #2 at 72 F, and #3 at 95 F; Outdoor rating test: #1 (one side at -26 F other side at 72 F), #2 at 72 F, #3 at 120 F | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 1 9 mm Parabellum ( Part 2 ) | Projectile Caliber : | 9 mm Parabellum | Cartridge Type: | 124 grain FMJ | Velocity Range: | 1175 to 1292.5 ft/sec. | Number of Shots: | 2 shots | Shot Spacing: | 1.25 to 1.75 in. | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | - | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 1 9 mm Parabellum ( Part 3 ) | Projectile Caliber : | 9 mm Parabellum | Cartridge Type: | 124 grain FMJ | Velocity Range: | 1175 to 1292.5 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | 1 to 1.50 in. unsupported edge shot | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 2 .357 Magnum ( Part 1 ) | Projectile Caliber : | .357 Magnum | Cartridge Type: | 158 grain JSP | Velocity Range: | 1250 to 1375 ft/sec. | Number of Shots: | 3 shots | Shot Spacing: | 4.0 inch triangle | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | (-26/72), 55, 72, 95, 120 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Indoor rating test: #1 at 55 F, #2 at 72 F, and #3 at 95 F; Outdoor rating test: #1 (one side at -26 F other side at 72 F), #2 at 72 F, #3 at 120 F | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 2 .357 Magnum ( Part 2 ) | Projectile Caliber : | .357 Magnum | Cartridge Type: | 158 grain JSP | Velocity Range: | 1250 to 1375 ft/sec. | Number of Shots: | 2 shots | Shot Spacing: | 1.25 to 1.75 in. | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | - | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 2 .357 Magnum ( Part 3 ) | Projectile Caliber : | .357 Magnum | Cartridge Type: | 158 grain JSP | Velocity Range: | 1250 to 1375 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | 1 to 1.50 in. unsupported edge shot | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 3 .44 Magnum ( Part 1 ) | Projectile Caliber : | .44 Magnum | Cartridge Type: | 240 grain SWC | Velocity Range: | 1350 to 1485 ft/sec. | Number of Shots: | 3 shots | Shot Spacing: | 4.0 inch triangle | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | (-26/72), 55, 72, 95, 120 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Indoor rating test: #1 at 55 F, #2 at 72 F, and #3 at 95 F; Outdoor rating test: #1 (one side at -26 F other side at 72 F), #2 at 72 F, #3 at 120 F | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 3 .44 Magnum ( Part 2 ) | Projectile Caliber : | .44 Magnum | Cartridge Type: | 240 grain SWC | Velocity Range: | 1350 to 1485 ft/sec. | Number of Shots: | 2 shots | Shot Spacing: | 1.25 to 1.75 in. | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | - | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 3 .44 Magnum ( Part 3 ) | Projectile Caliber : | .44 Magnum | Cartridge Type: | 240 grain SWC | Velocity Range: | 1350 to 1485 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | 1 to 1.50 in. unsupported edge shot | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 4 .30 30-06 ( Part 1 ) | Projectile Caliber : | .30 30-06 | Cartridge Type: | 180 grain JSP | Velocity Range: | 2540 to 2794 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | (-26/72), 55, 72, 95, 120 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Indoor rating test: #1 at 55 F, #2 at 72 F, and #3 at 95 F; Outdoor rating test: #1 (one side at -26 F other side at 72 F), #2 at 72 F, #3 at 120 F | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 4 .30 30-06 ( Part 2 ) | Projectile Caliber : | .30 30-06 | Cartridge Type: | 180 grain JSP | Velocity Range: | 2540 to 2794 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | 1 to 1.50 in. unsupported edge shot | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 5 .30 7.62 NATO ( Part 1 ) | Projectile Caliber : | .30 7.62 NATO | Cartridge Type: | 150 grain FMJ | Velocity Range: | 2750 to 3025 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | (-26/72), 55, ,72, 95, 120 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Indoor rating test: #1 at 55 F, #2 at 72 F, and #3 at 95 F; Outdoor rating test: #1 (one side at -26 F other side at 72 F), #2 at 72 F, #3 at 120 F | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 5 .30 7.62 NATO ( Part 2 ) | Projectile Caliber : | .30 7.62 NATO | Cartridge Type: | 150 grain FMJ | Velocity Range: | 2750 to 3025 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | (-26/72), 55, 72, 95, 120 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | 1 to 1.50 in. unsupported edge shot | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 6 9 mm Parabellum | Projectile Caliber : | 9 mm Parabellum | Cartridge Type: | 124 grain FMJ | Velocity Range: | 1400 to 1540 ft/sec. | Number of Shots: | 5 shots | Shot Spacing: | 4.5 inch square | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | - | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 7 .223 5.56 NATO | Projectile Caliber : | .223 5.56 NATO | Cartridge Type: | 55 grain FMJ | Velocity Range: | 3080 to 3388 ft/sec. | Number of Shots: | 5 shots | Shot Spacing: | 4.5 inch square | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | - | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 8 .30 7.62 NATO | Projectile Caliber : | .30 7.62 NATO | Cartridge Type: | 150 grain FMJ | Velocity Range: | 2750 to 3025 ft/sec. | Number of Shots: | 5 shots | Shot Spacing: | 4.5 inch square | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | - | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 9 .30 Cal. 30-06 ( Part 1 ) | Projectile Caliber : | .30 cal. 30-06 M2 AP | Cartridge Type: | 166 grain FMJ | Velocity Range: | 2,715 to 2,987 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. December 21, 2006 | Source: | UL752 -Rev. December 21, 2006 | Comments: | - | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 9 .30 Cal. 30-06 ( Part 2 ) | Projectile Caliber : | .30 cal. 30-06 M2 AP | Cartridge Type: | 166 grain FMJ | Velocity Range: | 2,715 to 2,987 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. December 21, 2006 | Source: | UL752 -Rev. December 21, 2006 | Comments: | 1 to 1.50 in. unsupported edge shot | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| | | Standard - Rating: | UL - Level 10 .50 cal. .50 BMG | Projectile Caliber : | .50 cal FMJ Military Ball | Cartridge Type: | 709.5 grain FMJ | Velocity Range: | 2,810 to 3,091 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. December 21, 2006 | Source: | UL752 -Rev. December 21, 2006 | Comments: | - | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 1 thru 3 SG 12 Gauge 2 3/4" ( Part 1A ) | Projectile Caliber : | 12 Gauge 2 3/4" | Cartridge Type: | 437 grain Slug | Velocity Range: | 1585 to 1743.5 ft/sec. | Number of Shots: | 3 shots | Shot Spacing: | 4.0 inch triangle | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | (-26/72), 55, 72, 95, 120 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Supplemental rating for levels 1, 2, and 3; Indoor / Outdoor rating testing also applies | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 1 thru 3 SG 12 Gauge 2 3/4" ( Part 1B ) | Projectile Caliber : | 12 Gauge 2 3/4" | Cartridge Type: | 437 grain Slug | Velocity Range: | 1585 to 1743.5 ft/sec. | Number of Shots: | 2 shots | Shot Spacing: | 1.25 to 1.75 in. | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Supplemental rating for levels 1, 2, and 3 | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 1 thru 3 SG 12 Gauge 2 3/4" ( Part 1C ) | Projectile Caliber : | 12 Gauge 2 3/4" | Cartridge Type: | 437 grain Slug | Velocity Range: | 1585 to 1743.5 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Supplemental rating for levels 1, 2, and 3; 1 to 1.50 in. unsupported edge shot | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 1 thru 3 SG 12 Gauge 2 3/4" Mag. ( Part 2A ) | Projectile Caliber : | 12 Gauge 2 3/4" Mag. | Cartridge Type: | 650 grain # 00 Buck | Velocity Range: | 1200 to 1320 ft/sec. | Number of Shots: | 3 shots | Shot Spacing: | 4.0 inch triangle | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | (-26/72), 55, 72, 95, 120 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Supplemental rating for levels 1, 2, and 3; Indoor / Outdoor rating testing also applies | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 1 thru 3 SG 12 Gauge 2 3/4" Mag. ( Part 2B ) | Projectile Caliber : | 12 Gauge 2 3/4" Mag. | Cartridge Type: | 650 grain # 00 Buck | Velocity Range: | 1200 to 1320 ft/sec. | Number of Shots: | 2 shots | Shot Spacing: | 1.25 to 1.75 in. | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Supplemental rating for levels 1, 2, and 3 | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 1 thru 3 SG 12 Gauge 2 3/4" Mag. ( Part 2C ) | Projectile Caliber : | 12 Gauge 2 3/4" Mag. | Cartridge Type: | 650 grain # 00 Buck | Velocity Range: | 1200 to 1320 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Supplemental rating for levels 1, 2, and 3; 1 to 1.50 in. unsupported edge shot | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 4 and 5 SG 12 Gauge 2 3/4" ( Part 1A ) | Projectile Caliber : | 12 Gauge 2 3/4" | Cartridge Type: | 437 grain Slug | Velocity Range: | 1585 to 1743.5 ft/sec. | Number of Shots: | 3 shots | Shot Spacing: | 4.0 inch triangle | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | (-26/72), 55, 72, 95, 120 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Supplemental rating for levels 4 and 5; Indoor / Outdoor rating testing also applies | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 4 and 5 SG 12 Gauge 2 3/4" ( Part 1B ) | Projectile Caliber : | 12 Gauge 2 3/4" | Cartridge Type: | 437 grain Slug | Velocity Range: | 1585 to 1743.5 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Supplemental rating for levels 4 and 5; 1 to 1.50 in. unsupported edge shot | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 4 and 5 SG 12 Gauge 2 3/4" Mag. ( Part 2A ) | Projectile Caliber : | 12 Gauge 2 3/4" Mag. | Cartridge Type: | 650 grain # 00 Buck | Velocity Range: | 1200 to 1320 ft/sec. | Number of Shots: | 3 shots | Shot Spacing: | 4.0 inch triangle | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | 0.125 in. thick corrugated cardboard | Witness Plate Distance: | 18 in. | Test Temperature: | (-26/72), 55, 72, 95, 120 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Supplemental rating for levels 4 and 5; Indoor / Outdoor rating testing also applies | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
| | Standard - Rating: | UL - Level 4 and 5 SG 12 Gauge 2 3/4" Mag. ( Part 2B ) | Projectile Caliber : | 12 Gauge 2 3/4" Mag. | Cartridge Type: | 650 grain # 00 Buck | Velocity Range: | 1200 to 1320 ft/sec. | Number of Shots: | 1 shot | Shot Spacing: | - | Velocity Measurement Distance: | - | Target Range: | 15 ft. | Sample Size: | 12 x 12 in. | Witness Plate: | None | Witness Plate Distance: | - | Test Temperature: | 72 F | Standard Document: | United States: UL752 -Rev. October 5, 2005 | Source: | UL752 -Rev. October 5, 2005 | Comments: | Supplemental rating for levels 4 and 5; 1 to 1.50 in. unsupported edge shot | Note: A test sample must pass all parts of a particular standard. i.e. part 1, part 2, etc... |
|
| |
|
|
|